The Car Speakers International Standards Specification Wiring Colors Distinguish Chart

Issue:      release time: on March 11 2014

ANT: automatic antenna control output signal (12 v low current which is used to control automatic antenna)

 

AMP + B: function and ANT is similar except that it is used to control external devices such as high power amplifier signal switch machine.

 

BATT: the power of the battery anode

 

ACC: start the ignition switch is typically used to host a signal can be switched on.

 

ILL: background light power supply

 

The connection of the other is horn.

 

The car speakers international standard specifications wiring colors to distinguish the table

 

Yellow '+ 12 v (BATTERYanode)

 

Red IGNITION + 12 v (the anode) a key

 

Black GROUND 12 v - earth wire (cathode)

 

Orange tiny ILLUMINATION 12 v + (small lights the anode)

 

Blue ANT12V + (antenna to activate the anode)

 

Green TELE -.mute 12 v - (cathode) hands-free set

 

Blue and white AMP 12 v + (expanding machine to activate the positive)

 

Gray RF (+) before the speaker on the right side of the anode

 

On the right side of the negative film of RF (-) before the horn

 

White LF left the anode (+) before the horn

 

White black LF left the cathode (-) before horn

 

Purple RR (+) and the anode horn the right

 

Violet black RR (-) after the speaker on the right side of the cathode

 

Green LR left the anode (+) after the horn

 

Green and black LR left negative (-) after the horn